联系我们

联系我们

地址:济南市高新区汉峪金谷A5-2栋

电话:15066665432

传真:0531-88984022

联系人:殷经理

邮箱:jnyygt@126.com

网址:www.jnyygt.com

新闻资讯

当前位置: 首页 - 新闻资讯

1)同一个炉号的不锈钢板应堆积在一同,以便整炉不锈钢板或整批不锈钢板能一同精整,而不打乱不锈钢板的加工技术进程,此外还可以避免混号和丢掉。

1) stainless steel plate with a furnace should be stacked together, so that the whole furnace of stainless steel plate or stainless steel plate to batch finishing, and do not disrupt the processing technology process of stainless steel plate, also can avoid mixed and lost.

2)同一订购合同的不锈钢板应放在一同,以便按合同组织出产。

2) the same order of the stainless steel plate should be put together, in order to organize production according to the contract.

制品不锈钢板的堆积办法有:

Products of stainless steel plate stacking method:

1)不分钢种而按不锈钢板断面别离堆积;

1) regardless of steel and stainless steel plate according to the section separation accumulation;

QQ截图20160822102152.png

2)不分不锈钢板断面而按钢种别离堆积;

2) regardless of the stainless steel plate and section steel were piled up by;

3)按订购合同堆积;

3) according to the order of the contract;

4)按不锈钢板的炉号(批号)堆积。

(4) according to the stainless steel plate furnace number (lot) accumulation.

由于种种原因,上述堆积办法,都不是独自运用的,而是依据出产的具体情况,相互配合运用的。

For a variety of reasons, the accumulation method, are not alone, but based on the specific situation of production, with each other to use.

从安全出产视点动身,不锈钢板堆积还应留意下列事项:

Starting from the point of view of safe production, the stainless steel plate should also pay attention to the following matters:

1)堆积不锈钢板时,有必要使不锈钢板的象征端朝向一侧,以便找出所需的不锈钢板。

1) when the stainless steel plate is piled up, it is necessary to make the symbolic end of the stainless steel plate to one side so as to find out the necessary stainless steel plate.

2)堆积高度应合乎安全技术规程规则的需求,堆积位置应间隔铁路或公路2m以上,各堆之间有必要留出不窄于1m的通道。

2) the accumulation height should be in line with the requirements of the safety technical specification rules, the accumulation position should be spaced from the railway or highway 2m above, there is a need to set aside not narrow in the 1m channel.

3)堆积不锈钢板有必要有垫铁或料架,以防不锈钢板堆下沉和倾斜。

3) the accumulation of stainless steel plate is necessary to have a pad iron or material, in order to prevent the stainless steel plate pile sinking and tilt.

本文由济钢一级代理提供技术支持,更多的详细精彩内容请点击我们的官方网站http://www.jnyygt.com,我们将会全心全意为您提供满意的服务。

This paper consists of Jigang an agent to provide technical support, with more exciting content, please click on our official website http://www.jnyygt.com, we will wholeheartedly provide you with satisfactory service.


上一篇:热轧卷板主要的用途及分类特性
下一篇:细晶Q420C高强板焊接接头性能
 
在线咨询 在线咨询
咨询热线
15066665432